4Al Standard Analog Input Module for Voltageand Current

AI 4xU/I 2-wire ST

Model no

Article No

P7 134-6HD01-0BA1

Description

AI 4xU/I 2-wire ST

Module Width

15mm

+86 13713990149

sales@huceen.com

Contact Now + Inquire

Product parameters Wiring diagram Relevant information

Specification parameters	Model	4Al Standard Analog Input Module for Voltageand Current
	Article No	P7 134-6HD01-0BA1
	Description	AI 4xU/I 2-wire ST

Standard	Supply Voltage	Rated Value (DC):24 V Permissible Lower Limit (DC): 19.2 V Permissible Upper Limit (DC): 28.8 V
	Reverse Polarity Protection	√
	Power consumption, Typ	0.85 W
	Environmental Conditions
	.STEP 7 TlA Portal	V14 and higher
	.STEP 7 V5.5	V5.5 SP3 and higher
	Number of analog input channels	4
	Input signal type (resolution)	± 5V (16 bits including symbol) ± 10V (16 bits including symbol) 1 to 5V (15 bits) 0 to 10V (15 digits) 0mA to 20mA (15 bits) 4mA to 20mA (15 bits)
	Conversion time (per channel)	180/60/50 ms
	Suppression frequency	16.6/50/60 Hz
	Shielded cable length, max	1000 m; voltage signal 200 m
	Smoothing level	None, 4, 8, 16 times
	Base Unit	A0 A1
	Diagnostic Interrupt	√
	Diagnostic Functions	• Power supply voltage monitoring • Disconnected (4 to 20 mA) • Short circuit (when 1 to 5V or 2-wire) • Accumulated faults • Overflow/underflow
	Basic accuracy (at 25 ℃)	Voltage: ± 0.3% Current: ± 0.3%
	Full temperature range accuracy (-30 ℃ to 60 ℃)	Voltage: ± 0.5% Current: ± 0.5%
	Isolation between channel and backplane bus	√
	Isolation between channels	√
	Operating Ambient Temperature	Horizontal Mounting, Min: -30°C Horizontal Mounting,Max: 60°C Vertical Mounting, Min: -30°C Vertical Mounting, Max: 50°C
	Module Width	15mm