IM ET08 communication module

Expansion rack module，6 smart series I/O modules can be extended

Model no

IM ET08

Article No

E 288-9ET08-0AA0

Description

Expansion rack module，6 smart series I/O modules can be extended

Dimensions WxHxD（mm）

47×100×81mm

Perfectly compatible with s7 200 Smart PLC

+86 13713990149

sales@huceen.com

Contact Now + Inquire

Product parameters Wiring diagram Relevant information

Specification parameters	Model no	IM ET08
	Article No	E 288-9ET08-0AA0
	Description	Expansion rack module ,6 smart series I/O modules can be extended

Conventional norm	Dimensions WxHxD（mm）	47×100×81mm
	Power Input Voltage	20.4-28.8VDC
	Power Input Current	Only interface module:2mA; Maximum load: 1500mA
	Power Consumption	2W
	5V DC Backplane Current Supply	1300mA, backplane current is continuously supplied

Communication Port	Quantity	2
	Electrical Type	RJ45(Not support polarity adaptation)
	Transmission Rate	10 Mbit/s and 100Mbit/s
	Isolation or not	Yes(field and logic）

Digital Input	Input Type	Sinking/sourcing type (IEC type 1 sinking)
	Number of Inputs	4
	Rated Voltage	24V DC
	Surge Voltage(Max)	35V DC, lasting 0.5s
	Logic 1 Signal (Min)	15V DC
	Logic 0 Signal (Max)	5V DC
	Input Delay（Max）	4.5ms
	Optical Isolation (field side and logic side)	500V AC, 1min

Digital Output	Output Type	Transistor output，Solid-MOSFET (Source type)
	Number of Outputs	4
	Rated Voltage	24V DC
	Voltage Range	20.4-28.8V DC
	Rated Voltage	8A，100ms
	Rated current per point (Max)	0.75A
	Switching Frequency (Max)	-
	Switching Delay (Max)	150µs
	Optical Isolation (field side and logic side)	500V AC, 1min
	Contact Lifetime
	.Non-loaded	-
	.Rated Load	-

Function Introduction	Overview	Ethernet interface module of H7-200Smart series transmits I/O data of I/O module expanded after interface module to master station through S7 slave protocol. Having following features: Up to 6 smart expansion modules can be expanded; Support S7, visiting I zone, Q zone, AI zone, AQ zone and V zone; It is convenient and efficient that S7 communication can be carried out with S7-200smart or H7-200smart series CPU through the S7 protocol (as the slave).
	Supported Module Type	Support all digital and analog expansion modules (including I/O modules that use V zone), DP01 is not supported.

Application industry