| Model no | ST30XP | |
Article No | E7 288-1ST30-XPA1 | |
Description | CPU ST30xp transistor | |
Conventional norm | Dimensions WxHxD（mm） | 125×100×81mm |
Power dissipatio | 18W | |
Available current（SM bus 5V） | 1400mA | |
Available current（Sensor power 24V） | 300mA |
| CPU specification | program storage (kb) | 24 |
Data storage(kb) | 12 | |
Retention memory（kb) | 10 | |
Data preservatio | permanent | |
Ontology integrated I/O | ||
Digital value | 18AI/12AO | |
Analog valu | 4AI/2AO | |
Process image size | 256-bit input (I)/256-bit output (Q) | |
Analog mappin | 56 words input (AI) 56 words output (AQ) | |
Maximum number of I/O module expansions | Up to 6 extensions | |
High speed counter (total | 6 | |
Uniphas | 4pcs 200KHz+2pcs 30KHz | |
Orthogonal phas | 2pcs 100KHz+2pcs 20KHz | |
Pulse output | 3pcs 100KHz | |
time | Non-retention （TON,TOF):192;Retainability：64 | |
Counter count | 256 | |
Bit memory（M） | 256 | |
Time brea | Two in total, the T32 and T96 have a resolution of 1ms | |
Edge brea | Four rising edges and four falling edges | |
Cloc | Usually 7 days, at least 6 days at 25°C | |
Memory card | support | |
Signal expansion boar | support |
Performance | Booleans’ operation time | 0.35uS/order |
Word transfer time | 1.2uS/order | |
Floating point operation time | 1.7uS/order |
Communication | interface | Ethernet：1;RS485 port：2（DB9）;Additional DB board 485 interface：1（CM01）; |
HMI equipmen | Ethernet：5 Connect; Serial port：4 Connect | |
Programming devic | 1Connect | |
Etherne | UPload and Download program：support；Touch screen upper computer communication：support；MODBUS TCP | |
| CPU（PUT/GET） | Network command support other products PUT/GET This product, a maximum of 5 hosts, support this product PUT/GET other products | |
Data transfer rate | Ethernet：10/100 Mb/s；RS485 System Protocol：9600,19200和187500 b/s；RS485 free port：1200到115200 b/s | |
isolate | Ethernet：Transformer isolation，1500VDC;RS485：no | |
Cable type | Ethernet：CAT5e Shielded cable RS485：PROFIBUS Network cable |
Power supply | Voltage range | 20.4-28.8VDC |
Input current（CPU only） | 190mA at 24V AC (without 300mA sensor power output) 470mA at 24V AC (with 300mA sensor power output) | |
Input current（Includes CPU and all expansion accessories） | 680Ma at 24VAC | |
Impulse curren | 6A at 28.8VDC | |
Sensor voltag | 20.4-28.8VDC | |
Power isolation | ||
Power input and logi | 500VAC,1min | |
Sensor power and logic | Unisolated |
| Input | Input points | 18 |
| Input type | Leakage type/source type (IEC Class 1 leakage type, except I0.0 to I0.3) | |
| Maximum continuous allowable voltage | 30VDC | |
| Surge voltage | 35VDC，0.5S | |
| Logic 1 signal | I0.0 to I0.3, I0.6 to I0.7: 4V DC at 8mA Other inputs: 15V DC at 2.5mA | |
| Logic 0 signal | I0.0 to I0.3, I0.6 to I0.7: 4 V DC at 1 mA Other inputs: 5 V DC at 1 mA | |
| Photoelectric isolation（Field side and Logic side） | 500VAC for 1 minute | |
| Isolation group | 1 | |
| Filtering time | Each channel can be individually selected (points I0.0 to I1.3): 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8us; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8ms |
| Output | Output points | 12 |
| Output type | Solid state MOSFET (source type) | |
| Voltage range | 20.4-28.8VDC | |
| Surge voltage | 8A for up to 100ms | |
| Rated current for each point | 0.5A | |
| Switching frequency | ||
| Turn-on delay（Qa.0-Qa.3) | The maximum length from disconnection to connection is 1.0us; Up to 3.0us from on to off | |
| Turn-off delay（Qa.4-Qb.7) | The maximum length from disconnection to connection is 50us; Up to 200us from on to off | |
| Photoelectric isolation（Field side and Logic side） | 500VAC for 1 minute | |
| Contact endurance | ||
| non-loaded | ||
| Rated load |
